Posted on January 8, 2009 by bluehavenpools
The cleaner sticks at the steps
The hose might be too short.
Check to see that the hose extends two full sections past the furthest point in the pool.
Check to see that the return line(s) are not affecting the cleaner’s movement.
Use the vacuum gauge to measure the vacuum in the cleaner hose. You should have [...]
Filed under: Blue Haven Pools | Tagged: Hayward, hayward pool cleaner | Leave a Comment »
Posted on January 6, 2009 by bluehavenpools
The hoses are twisting
Cleaner hoses cannot be coiled up for storage. If you have coiled them, take the sections apart, lay them straight, and leave them outside for an entire day and night. Once the curls are removed, the hose should be usable.
Cleaner won’t climb the wall of my vinyl liner pool
Depending on the [...]
Filed under: Blue Haven Pools | Tagged: Hayward, hayward pool cleaner | Leave a Comment »
Posted on January 4, 2009 by bluehavenpools
My cleaner doesn’t move
Cleaners depend on several factors to make them operate. There must be enough water flow past the turbine. Use a vacuum gauge to measure the vacuum in the cleaner hose. You should have 1″ vacuum per section of hose.
Second, the four small “shoes” must be able to grip the pool surface. Make [...]
Filed under: Blue Haven Pools | Tagged: Hayward, hayward pool cleaner | Leave a Comment »
Posted on January 2, 2009 by bluehavenpools
Suction vs. Pressure
Automatic Suction Pool Cleaners
Suction cleaners are ideal for pools located in desert and tropical climates with cleaning requirements for fine particles of dirt and small leaves and twigs. They can be installed through the skimmer or on a dedicated line in less than 15 minutes and do not require additional tools.
Navigator
Automatic Pressure Pool [...]
Filed under: Blue Haven Pools | Tagged: Hayward, hayward pool cleaner, pool cleaners | Leave a Comment »
Posted on December 8, 2008 by bluehavenpools
Hayward replacement swimming pool lights are available in minimum cord lengths of 50 ft. All lights below are for replacement only and are not intended for new code installations. 1 year limited warranty.
Note: DuraLite Series light fixtures mount in the following fixture housings (niches) only:
SP0600U – DuraNiche Concrete (#LI193)
SP0607U DuraNiche – Vinyl/Fiberglass (#LI195)
SP0555 Series (Stainless [...]
Filed under: Blue Haven Pools | Tagged: Hayward, pool lighting | Leave a Comment »
Posted on September 20, 2008 by bluehavenpools
Designed for in-ground pools of all types and size and in-ground spas, The Hayward Max-Flo self-priming pump combines maximum performance with durable corrosion-proof materials. The swing-aside hand and strainer basket make it the ideal choice for both new and existing pool installations.
Filed under: Blue Haven Pools | Tagged: Hayward, Pump | Leave a Comment »
Posted on May 7, 2008 by bluehavenpools
The following tips come from Hayward Pool Products, one of the leading manufacturers of pool equipment:
Opening your pool signals the start of warm weather and relaxed attitudes. Whether you’re emerging from a long snowy winter or a quick brush with cooler temps, opening your pool can be a simple process.
Remove leaves and debris from pool [...]
Filed under: Blue Haven Pools | Tagged: Hayward | Leave a Comment »
Posted on May 5, 2008 by bluehavenpools
Utilizing its AquaDrive® program technology, the Phantom Turbo harness the power of water, to thoroughly clean every inch of the pool—something other cleaners cannot deliver. Manipulating the precision of its extra wide cleaning path, not only does it pick up leaves, twigs and acorns, it removes particles as small as a grain of sand – [...]
Filed under: Blue Haven Pools | Tagged: Hayward, Pool Cleaner | Leave a Comment »